Wheel hub cleaning set 2

The ATE wheel hub cleaning set 2 for wheel hubs with studs allows you to clean the wheel hub quickly, safely and at low cost, before the brake disks are fitted. The mounting face for the brake disks on the wheel hub must be bright before the disk is mounted to ensure that �t lies fully flush. Only then can it be guaranteed that the installation tolerances of the brake disks can be adhered to. Two different sizes of cleaning disks and the corresponding holders allow the best possible finish around the studs over which the disks are passed.
The cleaning process does not normally take more than 10 seconds per hub. The hole in the cleaning disk provides firm guidance and ensures that the disk does not slip off the hub. The fact that the entire surface of the disk is used ensures a lifetime of approx. 400 cleaning operations.